3" face Thermometer with 6" Long stem
If you will install this directly through the wall of a keg or kettle you will need an install kit sold here.
PLEASE NOTE THAT THERMOMETERS HAVE A GLASS LENS BUT THEY MUST BE PROTECTED FROM DIRECT FLAME EXAUST
3 inch face - 6 inch Stem
Specifications:Dial Size: 3" Case, Stem: 304 Stainless Steel
Connection: 1/2" NPT. Accuracy: 1% of full scale
Dual Scale - Celcius Fahrenheit calibration screw
Requires a 13/16" or 7/8" step bit or hole saw to install.
Scale will be from 0-220
Back of the thermometer: Thread is 1/2" male NPT (national piper taper)
Suggested stem length:
2.5" - Boil kettles when using immersion chillers
4" or 6" - Mash tuns and Hot liquor tanks.
6" - THERMOMETER SIGHT GAUGES - will leave 3" of stem in the kettle / keg.
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: